by duncanpound » Mon Feb 08, 2010 9:51 pm
cant find the post, sorry mate
its relatively easy though. just been out to my car.
you will need to remove the wipers though before you take the scuttle off. lift up the cap at the pivot of the wiper stalk and pull it gently as they break very easily. then just undo the nut with an adjustable spanner. dont lose the washer underneath. might need to spray with wd40 or muts nuts on the thread/shaft because 9 times out of 10 it is stuck on the shaft.
mine came off with a gentle tap of 2 hammers at the same time either side of the stalk.
then undo the 5 screws holding the scuttle down (phillips screwdriver needed) and they should come out easy
then its simple removal of the scuttle